Recyclable Polycarbonate Conservatory Roof Panels With Double
Hollow Wall
Polycarbonate Conservatory Roof Panels Features
1. Outstand impact reisistance
2. UV protection
3. Hight heat resistance
4. Light weight: 1/2 of glass of the same thickness
5. Good light transmittance
6. superior dimensional stability
Polycarbonate Conservatory Roof Panels Application
(1). Sunshades for stadiums and bus shelters, ect.
(2). Skylight, lighting for corridors, balcony, passages and subway
entries, walkways.
(3). Do-It-Yourself (DIY), awning, canopy.
(4). Advertising lamp boxes, signs
(5). Anti-riot shield, bullet resistant material, Bank ATMs.
(6). Conservatories, agricultural greenhouses, zoos, botanical
gardens.
(7). Industrial Roofing and Glazing
Polycarbonate Conservatory Roof Panels Specification
(1) Size : 2.1m * 11.8m ( the max width is 2.1m, other size can
also be ordered)
(2) Thickness: the most commonly used thickness is 6mm and 8mm, but
if you need 4mm, 5mm and 10mm, we can also do as you need.
(3) Weight: 0.85kg/sqm - 1.7kg/sqm
(4) Length: 5.8m, 5.95m, 11.8m
Polycarbonate Conservatory Roof Panels For Different Colors
Thickness(mm)
Color | 4 | 5 | 6 | 8 | 10 |
| Light transimission |
Clear
| 80% | 78% | 76% | 74% | 72% |
Lake Blue
| 56% | 54% | 51% | 49% | 48% |
Green
| 55% | 52% | 51% | 48% | 46% |
Grass green
| 54% | 52% | 50% | 46% | 44% |
Brown
| 34% | 32% | 30% | 26% | 23% |
Blue
| 33% | 31% | 28% | 25% | 20% |
Opal
| 27% | 25% | 22% | 18% | 15% |
Advertising white
| 16% | 14% | 12% | 9% | 8% |
Polycarbonate Roofing Sheet Installation Instruction
1. Expose only the face that has the UV protection if the sheets
include 1-side UV co-extrusion layer. Double-side UV can expose
either side face to sunlight.
2. Store sheets on flat surfaces. Use an opaque cover, tightly
secured, to protect from wind, rain and sun. Storage is always
preferable indoors.
3. Sheets should be install with the rib channels are sloping
downwards. That orientation will reduce accumulation of dirt inside
the sheet and ease gravity drainage of condensation moisture.
4. Allow enough or lengthwise and widthwise for expansion of
sheets.
5. Improved performance can be obtained by replacing the washers
with special plastic screw buttons, fitted with a suitable rubber
gasket, with or without a closing cap. They fit the thickness of
each type of sheet (6, 8, 10, 16mm, and possibly 25 mm), differing
by sleeve length.
6. Never walk on the sheets directly. Always use wooden boards
mounted in the same direction of the structural supports.
7. Self-cleaning by rain is usually sufficient. Using diluted mild
household detergents. Make sure the detergent contains no abrasives
or solvents. Pre-wash with warm water, then wash the stained area
with a soft sponge or brush, preferably with hot water, until the
stain disappears. Rinse with water and dry with a soft cloth.
